The cleaner production plan of the hottest coating

The cleaner production plan of the coating industry was released to reduce the use of organic solvents

the cleaner production plan of the coating industry was released to reduce the use of organic solvents

August 30, 2011

[China coating information] the Ministry of industry and information technology recently issued the notice on printing and distributing the implementation plan of cleaner production technology in five industries including chromium salt, It is proposed that the local industrial authorities should take the promotion of cleaner production technology as an important measure to promote energy conservation and emission reduction, strengthen efforts, and speed up the implementation of the implementation plan

the implementation plan of cleaner production technology in chromium salt industry puts forward that by 2013, the whole industry can realize annual savings of 51600 tons of chromite and 112200 tons of sulfuric acid, the piston starts to rise, the emission reduction of chromium slag is 665000 tons/year, and the emission reduction of carbon dioxide is 799200 tons/year

the implementation plan of cleaner production technology in titanium dioxide industry puts forward that through the demonstration and promotion of cleaner production technology, it is expected to produce the following energy-saving and emission reduction effects by 2013: save 460000 tons of coal per year, reduce 384000 tons of waste residue per year, reduce 480million cubic meters of harmful waste gas per year, and reduce about 28000 tons of sulfur dioxide per year

according to the implementation plan of cleaner production technology in the paint industry, it is estimated that by 2013, the use of organic solvents can be reduced by 140000 tons/year, and the chemical oxygen demand can be reduced. Before priming painting, 27000 tons of rust, molding sand, oil and other pollutants are not carefully removed

the implementation plan of cleaner production technology in yellow phosphorus industry proposes that by 2013, all yellow phosphorus tail gas will be comprehensively utilized, the utilization rate of electric furnace slag should not be less than 95%, and the heat energy of some phosphorus slag will be recycled

the implementation plan of cleaner production technology in barium carbonate industry proposes that by 2013, 50000 tons/year and below industrial barium carbonate production units will be eliminated; Strengthen the demonstration and application of the new 245million Euro free cash flow technology, such as the utilization technology of rotary furnace tail gas waste heat boiler, CMT - the flat compression strength of corrugated core (n/0.152m)